Pipette Tips Manufacturers Introduces The Characteristics Of Pipette Tip Filters

Pipette Tips Manufacturers introduce the features of pipette tip filters:

(1) The suction head is made of medical-grade polypropylene, and the filter element is made of ultra-high molecular weight polyethylene, which has good hydrophobicity.

(2) The filter element effectively forms a protective structure between the pipette and the sample to ensure the safety of the sample; it reduces the harm of the gas residue in the gun body to the operator during the pipetting process and improves the repeatability of the experiment.

(3) Provide low adsorption and ordinary filter tips, no coating design, will not pollute the sample, and the surface of the low adsorption tip is completely hydrophobic.

(4) It can be sterilized by high temperature and high pressure.

(5) Sterile rack and ordinary bulk are provided.

Triple guarantee:

1. Personnel safety guarantee: reduce the spread of harmful samples and protect the health of operators.

2. Sample safety guarantee: prevent cross-contamination between samples and contamination of impurities inside the pipette, ensure that the samples meet the requirements of subsequent experiments (no DNase/RNase, no PCR inhibitors, etc.), and minimize sample loss.

3. Equipment safety guarantee: avoid liquid overshoot into the pipette cavity, maintain the precision and accuracy of pipetting, and prolong the service life of the pipette.

application:

1. Processing PCR samples and other demanding molecular biology samples;

2. Handle dangerous samples such as radioactive, biotoxic, corrosive, and volatile;

3. Attention to the installation of the suction head:

4. For most brands of pipettes, especially multi-channel pipettes, it is not easy to install the tip: in order to pursue a good seal, it is necessary to insert the pipette handle into the tip, turn it left and right or shake it back and forth vigorously Tighten. Some people will use the pipette to hit the tip repeatedly to tighten it, but this operation will cause the deformation of the tip and affect the accuracy, and in severe cases, it will damage the pipette, so such an operation should be avoided.